Smart Mini Dehumidifier 200W for Rmu with RS485

Product Description

This dehumidifier is developed based on the shortcomings of traditional heating - type dehumidifiers.

 

The dehumidifier utilizes the Peltier effect. The refrigeration chip cools to a very low temperature, forming a water - condensing surface. The water vapor in the air condenses on this surface and is drained out of the box through a drainage pipe. As the moisture in the electrical cabinet is continuously drained out, the air humidity drops significantly. Even if the ambient temperature changes, since there is very little moisture in the air inside the electrical cabinet, condensation will no longer occur. This fundamentally solves the humidity problem.

Technical Parameters

Parameter Code	Parameter Name	Setting Range	Explanation
t1	Temperature Output Start Value	0 - 70°C	Factory setting: t1 = 5°C, tHC = 8°C For heating - type: t1 = 5°C, tHC = 8°C; for cooling - type: t1 = 40°C, tHC = - 8°C
tHC	Temperature Output Stop Start Value	- 10 - 10°C	Factory setting: t1 = 5°C, tHC = 8°C For heating - type: t1 = 5°C, tHC = 8°C; for cooling - type: t1 = 40°C, tHC = - 8°C
H1	Dehumidification Start Value	20 - 90%RH	Factory setting: H1 = 65%, H2 = 55%. Dehumidification starts when humidity is higher than H1 and stops when humidity is lower than H2
H2	Dehumidification Stop Value	20 - 89%RH	Factory setting: H1 = 65%, H2 = 55%. Dehumidification starts when humidity is higher than H1 and stops when humidity is lower than H2
Add	485 Communication Address	1 - 247	Default is 01
bt	Baud Rate	0 - 6	0(2400), 1(4800), 2(9600), 3(19200), 4(38400), 5(57600), 6(115200)